The Tap Factory’s K2H2O Refillable Water Filter fits onto your incoming mains cold water, and serves multiple purposes. Not only does it protect your instant hot water tank from limescale (should you be using it with this application) but it also provides filtered drinking water with less impurities. This filter can be used with any kitchen tap aside from our instant boiling water ranges for limescale free drinks. We recommend you change the inner cartridge ever 6 months.
Specifically developed for residential use, The K2H2O is an under sink mains water filter, consisting of a housing
system and replaceable carbon wrap , filter media with optional scale reduction (Ecological).
The K2H2O provides bottled quality filtered water from your existing kitchen tap. It reduces chlorine levels and
improves the taste and odour of the cold water from your cold tap. A filter change is only required every 6 months
(Economical) The filter has the ability to reduce lime scale. The filter is a carbon wrap system which gives a higher flow rate and lower pressure drop than traditional carbon block products.
The K2H2O Filter housing is tested to NSF Standard 42 for microbiological safety and structural integrity. WRAS Approved hoses supplied.
Burst Pressure of 400 PSI.
Hydrostatic to 350 PSI for 15 mins.
Cycle Testing from 0-150 PSI 100,000 times.
Housing Construction: FDA approved polypropylene with 10% talc
Filter Media: Carbon wrap with polypropylene core, with phosphate
Capacity: 28,000 litres / 7,500 USG
Max – Minimum Operating Pressures: Min 1 bar – max 8.5 Bar or 120 PSI
Flow Rates: 5 Litres per minute
Micron rating: 5 micron
Chlorine Reduction: 80% reduction in chlorine @ 2ppm over 28,000 litres / 7,500 USG
Scale Reduction: Using 3.5gm polyphosphate beads, certified to NSF 42 Standards
Dimensions: 220mm Wide x 220mm Deep x 330mm High
Why Activated Carbon Filters?
Methyl Ethyl Ketone
Rubber Hose Taste
Heavy Metals (excluding Lead)